Home   |   Introduction   |   Products   |   Feedback   |   Contact Us
Quick Navigation
MATERIAL BENDER
C-SHAPED PURLINE FORMING MACHINE
M-SHAPED PURLINE FORMING MACHINE
Z-SHAPED PURLINE FORMING MACHINE
HIGHWAY GUARDRAIL
FORMING MACHINE
CABLE TRUNKS MAKING MACHINE
STEEL DRAWER SLIDE MAKING MACHINE
VARIOUS KINDS OF PROFILE SECTION BE SHAPED BY ROLL FORMING MACHINE
OTHER PRECISION PROFILE ROLL FORMING FOR AUTOMOBILE
PROFILE ROLL FORMING FOR CIVIL BUILDING& DECORATION
STEEL TILE FORMING MACHINE
STEEL SLITTER LINE
STEEL SHEAR LINE
STEEL LEVELLER, DECOILER, RECOILER,SHAFT & ROLL FORMING TOOLS
SPIRAL TUBE FORMER
DIGITAL CONTROL FOLDER & SLITTER
 

MATERIAL BENDER

Components
        
Model JXW500 Section Material Bender mainly consists of welded machine frame, forming rollers, work piece supporters, hydraulic system, roller supporting equipment, control system, etc.
        
Basic Parameters

Bending section material

Engineering practice examples

        1.Bending-resistance modulus of section: 270-2000cm3
        2.Max. resistance of material:  245Mpa (as Q235A)
        3.Channel steel outward bending:  Model of channel steel: 50#
                                                                     Min. bending diameter:ø4000mm
        4.Channel steel inward bending:  Model of channel steel: 40#
                                                                   Min. bending diameter:ø4000mm
        5.Steel tubing: Max. Section:ø426mm〜16mm
                                  Min.bending diameter:ø18000mm
                                  Min. Section;ø200mm〜10mm
                                  Min. bending diameter:ø3500mm
        6.Band steel flat bending:  Max. Section: 500mm〜75mm
                                                       Min. Bending diameter:ø3500mm
        7.Band steel upright bending:  Max. Section:200mm〜60mm
                                                              Min. Bending diameter:ø5000mm
        8.Working speed: 2-3M/min
        9.Motor power: Oil pump: 22KW 1470rpm
                                    Roller supporter: 0.75KW〜2 0.18KW〜2
        10.Dimension: 4880mm〜3200mm〜2000mm (Length〜width〜height)
        11.Total weight: About 32000kg

        Application
        Model JXW500 Section Material Bender is used to make circle, curve, or spiral for work pieces. It is widely used in such fields as petroleum industry, chemical engineering, hydroelectricity, shipbuilding, steel structure, machine making and so on.

 

WUXI HD EQUIPMENT CO.,LTD.
ADD:25 Xindu Road, Fangqian Industrial Park District,Wuxi,Jiangsu,China
P.C.:214111
TEL+86-510-88231999,+86-1360-151-2939
FAX+86-510-88231999
MR.Liu Qing Yang
E-mail:sales@hdmetalforming.com